ECOTECH VOC 1000 Methane Analyser spec
VOC 1000 METHANE, NON METHANE & TOTAL HYDROCARBON ANALYSER ECOTECH VOC 1000 is designed to measure total, methane and non-methane hydrocarbon gases providing accurate and reliable measurement data. VOC 1000 analyser provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations. The analyser is based on a Flame Ionisation Detector (FID) with electronic control that delivers a small portion of the sample gas to the detector flame. During the combustion process, organic or hydrocarbon-based gases in the sample are ionised, then they are detected by the instrument and reported as a concentration. BENEFITS • Hydrocarbon detection from sub-ppm to 1000 ppm (methane) • Programmable automatic calibration at user-defined intervals or manual calibration • Electronic control of fuel, air and sample • Electronic back-pressure regulator with sample bypass system ensures fast response • Programmable analog output ranges • Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air • Graphical display and easy to use menu system • Internal single or multipoint modules, with or without sample pump for pre-filtered (< 0.1 microns), non-condensing samples • Multilevel concentration and fault alarms that result in an audible and visually displayed alarm. Alarms may also be mapped to relays to control external equipment • Supports hydrogen 35 cc/min (blend 100 cc/min), air 175 cc/min. Hydrocarbon content must be < 1 ppm. SPECIFICATIONS Detector: Oxidiser: Range: Repeatability: Drift: Response: Support gases: Operating temperature: Operating humidity: Power: Display: Relay outputs: Analog outputs: Digital outputs: Dimensions: Weight: Connections: Flame Ionisation Detector (FID) Non-methane gases 0 - 200 ppm (0 - 1000 ppm optional) +/- 1 % full scale +/- 1 % of full scale (24 hours) T90 < 30 seconds Hydrogen 35 cc/min Air 175 cc/min 0 - 40 ºC 0 - 95 % non condensing 90 - 240 VAC 50/60 Hz, 3A 8.6 x 11.4 cm graphical display 5 programmable form A relays rated to 3A @ 230 VAC 1 programmable 0 - 20 or 4 - 20 mA isolated output (optional 3 analog output board) RS232, Ethernet 48.3 x 36.2 x 13.3 cm 9 kg 1/4” tube fitting connectors FS 603790 OHS 603791 ECOTECH Pty Ltd (Global Head Office) 1492 Ferntree Gully Road Knoxfield VIC 3180 Melbourne Australia +61 3 9730 7800 [email protected] ecotech.com Specifications subject to change without notice. Ecotech & VOC 1000 are trademarks or registered trademarks of ECOTECH Pty Ltd in the United States and/or other countries. © 2019 ECOTECH Pty Ltd. All rights reserved. 20191008
