Acoem HTO 1000 Thermal Oxidiser spec
HTO-1000 Thermal Oxidiser FEATURES The Acoem HTO-1000 Thermal Oxidiser is specifically configured for each gas application by using different catalysts and operating temperatures. The oxidiser is used to oxidise gaseous compounds in an atmosphere containing oxygen. Conversion efficiency is dependent on gas, concentration, oven temperature and flow rate. NH 3 version: (Flow rate 0.30 - 0.32 lpm) • NH 3 conversion efficiency at 200ppb > 88 % at oven temp 540 °C* TS version: (Flow rate 0.65 – 0.70 lpm) • Operating temperature can be varied depending on desired target gas • H 2 S conversion efficiency at 200ppb > 95% at oven temp 900 °C • DMS Conversion Efficiency at 200ppb > 85% at 900 °C • COS Conversion possible at 1040 °C The Acoem HTO-1000 Thermal Oxidiser is a thermal converter designed to be used with oxides of nitrogen (NO x ) gas analysers for the measurement of ammonia (NH₃) or with sulphur dioxide (SO₂) gas analysers for the measurement of hydrogen sulphide (H₂S) or total reduced sulphur (TRS). HTO-1000 converts normal ambient concentrations of the target gas (NH 3 , H 2 S or TS/TRS). If the measurement of COS as a component of TS or TRS is required, then the oven temperature should be configured to 1040 °C. • TRS applications^ SPECIFICATIONS Power: Consumption: Weight: Dimensions: Operating temperature: 240 VAC, 50 Hz, 3.15 A Slo-Blow fuse 110 VAC, 60 Hz, 5 A Slo-Blow fuse 200 VA 10 kg 220 mm 5 RU height 484 mm width 220 mm depth 25 - 1040 °C at 240 VAC / 50 Hz It can also be used for hydrocarbon removal from air creating hydrocarbon free zero air. Gas temperature accuracy: ± 5 °C Flow rate: 0.1 - 1.5 lpm Quartz tube volume: Gas pressure: Response time: 88.5 cc Vacuum to max. 2 bar pressure 5 - 10 % of rise / fall time of analyser. * Typical temperature. Individual oven temperatures may be set differently. ^ Requires use of SO x scrubber (built into Acoem TRS analyser). Efficiencies may be slightly lower than TS due to losses in the SO x scrubber. 1492 Ferntree Gully Road Knoxfield VIC 3180 Melbourne Australia +61 3 9730 7800 [email protected] acoem.com Specifications subject to change without notice. All images used are for illustrative purposes only. All trademarks and registered trademarks are the property of their respective owners. © 2021 Acoem and all related entities. All rights reserved. 20211116
