microAeth® MA200 microAeth® MA200 microAeth ® AE51 microAeth® MA200 Black Carbon monitor microAeth® MA200 Black Carbon monitor The microAeth® MA200 is a compact, real-time, wearable 5-wavelength UV-VIS-IR Black Carbon monitor Communications The with microAeth® a 15 sampling MA200 location is a automatic compact, filter real-time, tape advance wearable system 5-wavelength which allows UV-VIS-IR for up Black to 2-3 Carbon weeks monitor of USB connectivity to Windows®-based PC with with continuous a 15 sampling measurements. location automatic filter tape advance microAethCOM. system which allows for up to 2-3 weeks of continuous measurements. The device is a self-contained instrument with built-in pump, Data flow Output control, data storage, and battery with The onboard device GPS, is a satellite self-contained time synchronization, instrument with accelerometer, built-in pump, Internal altimeter/barometer, flow data control, files are data uploaded storage, and sensors microAethCOM and battery for relative with PC onboard humidity Measurement GPS, and temperature. Principle satellite time synchronization, accelerometer, software altimeter/barometer, and stored on local and disk. sensors for relative humidity Real-time and analysis temperature. by measuring the rate of change The in absorption MA200 is of designed transmitted for light on-person, due to continuous mobile applications PC and Software multi-day / multi-week measurement collection of aerosol deposit on filter. Measurement at 880 The campaigns MA200 with is designed low-power for on-person, operation. mobile applications microAethCOM and multi-day software / multi-week is included. measurement Provides visual nm interpreted as concentration of Black Carbon (‘BC’). interface including real-time BC mass concentration campaigns with low-power operation. values. Facilitates settings configuration, calibration The Measurement spectrum Range measurement provides insight into the composition of light absorbing carbonaceous particles routines, downloading data, and uploading new The and 0-1 mg spectrum helps BC/m to 3 distinguish , filter measurement life time among dependent provides the different on insight concentration optical into the signatures composition instrument of various of firmware. light combustion absorbing carbonaceous sources such particles as diesel, woodsmoke, and flow helps rate to setting: distinguish biomass, and among tobacco. the different optical signatures of various combustion sources such as diesel, woodsmoke, avg. 5 µg BC/mbiomass, 3 for 24 hours and @ tobacco. 100 ml/min Dimensions The avg. instrument 100 µg BC/msupports 3 for 3 hours the @ DualSpot® 50 ml/min loading compensation 4.6 in (117 method mm) L which x 2.6 in corrects (66 mm) for W optical x 1.5 in loading (38 mm) D The effects avg. instrument 1 mg and BC/m provides 3 supports for 15 additional minutes the DualSpot® @ information 50 ml/minloading about compensation aerosol optical method properties. which corrects for optical loading effects and provides additional information about aerosol Weight optical properties. Measurement Resolution Approximately 9.88 ounces (280 g). 0.001 µg BC/m 3 Power Measurement Precision Example Applications Internal rechargeable lithium-ion battery. ±0.1 µg BC/m Wearable 3 , 1 min avg., personal 150 ml/min monitoring flow rate Example Applications Mobile monitoring Power Supply Adapter Continuous Wearable personal real-time monitoring monitoring Multi-week Mobile monitoring Measurement Timebase (User setting) Input: 100~240 VAC 50/60 Hz monitoring 0.2 A 1, 10, 30, 60, Continuous or 300 seconds Exposure real-time assessment monitoring Output: 5VDC / Multi-week 0.5A Health effects monitoring Flow Rate (User setting) Exposure Occupational assessment safety Charging Time UAVs Health & vertical effects profiling** Internal pump provides Source Occupational 50, 100, 150, apportionment safety or 200 ml/min, 4 hours to full UAVs charge &(using Woodsmoke vertical AC profiling** adapter, instrument monitored by mass flow meter and stabilized by turned off). closed-loop control. Source Tobacco apportionment Woodsmoke Biomass Tobacco Total Run Time (Single Biomass battery charge) Sampling Minimum 24 hours @ 300 second timebase at 100 ml/min 3 mm spot created on filter strip containing insert of flow rate. Run time may vary due to PM concentrations. T60 Teflon-coated borosilicate glass fiber filter material. PM2.5 size selective inlet available. Operation Environment 0 ~ 40 °C operating, non-condensing. **Contact AethLabs for application support. **Contact AethLabs for application support. © Specifications 2018 AethLabs are subject | San to Francisco, change without California notice. | https://aethlabs.com Specifications | firstname.lastname@example.org - microAeth AE51, Page 1 of 1, Jul 2016, Rev 04 © 2018 AethLabs | San Francisco, California | https://aethlabs.com | email@example.com Consumables Filter strip: 1 filter strip per sampling campaign, typically one per day. High concentration sampling may require more than one filter per day. Data Storage 4 MB internal flash memory, providing up to 1 month data storage when operating on a 300 second timebase, and 1 week when operating on a 60 second timebase. © 2016 AethLabs | San Francisco, California | https://aethlabs.com | firstname.lastname@example.org
"Very efficient. Competitive pricing. The reminders, I’m so busy in my job that it’s so great to have a reminder to do something. It really helps me.
I’m very happy".
- Tim Cannon – Research and Development Manager; Pecan Engineering Pty Ltd