8301 Series ZERO AIR GENERATORS ECOTECH 8301 Series Zero Air Generators have been designed to supply zero air (contaminant free) to a dilution calibration system, such as the GasCal 1100. BENEFITS Model 8301LC • Available as either a 19” rack-mounted enclosure or as a portable version • Provides in excess of 9 LPM at 2 bar or 200 kPa, 20 °C ambient and sea level. Model 8301LC-H • A high capacity variant • Provides in excess of 20 LPM at 2 bar or 200 kPa, 20 °C ambient and sea level. Model 8301P • Provides in excess of 9 lpm of zero air at a pressure of 200 kPa, 20 °C ambient and sea level, and is ideal for use with dilution gas calibrators. 8301LC Zero Air Generator 8301P Portable Zero Air Generator The system comprises a compressed air source, permeation dryer and a series of optional scrubbers chosen depending on the application, producing clean, dry dilution quality “zero air.” SPECIFICATIONS Zero air flow: Protection: Zero air pressure: Dew Point: Power: Air Scrubbers: (Only standard on Model 8301P) Size: 8301LC & 8301LC-H: 8301P: 0 - 10 l/min (std for 8301LC) 0 - 20 l/min (std for 8301LC-H) 0 - 9 l/m at 200 kPa (std for 8301 P) Pump is thermally protected 100 - 200 kPa 200 kPa (nominal for portable version) - 15 °C (nominal)* 220 VAC 50 Hz (115 VAC 60 Hz optional) Air Clean-Up Canister removes: NO x , NO, NO 2 , O 3 , SO 2 , H 2 S, Less < 0.1 ppb Optional: Air cleanup canister for NH 3 or CO 2 height: 230mmH (5RU) with rubber feet width: 482mm depth: 352mm height: 250mm width: 280mm (including scrubber canisters) length: 565mm (including optional HCS-1000)^ * specifications are subject to environmental conditions and flow rates. ^ portable version can be optioned with a HCS-1000 fitted to the end.