ECOTECH HTO 1000 Thermal Oxidiser spec sheet
HTO-1000 Thermal Oxidiser THERMAL CONVERTER FEATURES The ECOTECH HTO-1000 Thermal Oxidiser is specifically configured for each gas application by using different catalysts and operating temperatures. The oxidiser is used to oxidise gaseous compounds in an atmosphere containing oxygen. ECOTECH HTO-1000 Thermal Oxidiser is a thermal converter designed to be used with nitrogen gas analysers for the measurement of ammonia (NH 3 ) or with sulphur dioxide gas analysers for the measurement of hydrogen sulphide (H 2 S) or total reduced sulphur (TRS). ECOTECH HTO-1000 can also be used for hydrocarbon removal from air creating hydrocarbon free zero air. • NH 3 Conversion Efficiency 88 - 94 % • NH 3 Oven temperature 680 °C • H 2 S Conversion Efficiency > 95 % • H 2 S Oven Temperature 350 °C • Range: 0 - 2000 ppb H 2 S • TS Conversion Efficiency - Concentration & Oven Temperature Dependent • TS Oven Temperature - 900 to 1040 °C • Range: 0 - 20,000 ppb. SPECIFICATIONS Power: Consumption: Weight: Dimensions: Operating temperature: Gas temperature accuracy: Flow rate: Quartz tube volume: Gas pressure: Response time: 240 VAC, 50 Hz, 3.15 A Slo-Blow fuse 110 VAC, 60 Hz, 5 A Slo-Blow fuse 200 VA 10 kg 220 mm 5RU height 484 mm width 220 mm depth 25 - 1040 °C ± 5 °C 0.1 - 1.5 l / min 88.5 cc Vacuum to max. 2 bar pressure 5 - 10 % of rise / fall time of analyser. FS 603790 OHS 603791 ECOTECH Pty Ltd (Global Head Office) 1492 Ferntree Gully Road Knoxfield VIC 3180 Melbourne Australia +61 3 9730 7800 email@ecotech.com ecotech.com Specifications subject to change without notice. Ecotech and HTO-1000 are trademarks or registered trademarks of ECOTECH Pty Ltd in the United States and/or other countries. © 2019 ECOTECH Pty Ltd. All rights reserved. 20190822
