BAM-1022 The BAM 1022 offers the following advanced features: • In-Situ measurement of PM that provides high accuracy, minimal measurement artifacts. • Reduced background determination frequency. • Unsurpassed performance under high ambient dew point operation. THE BAM 1022 OFFERS THE FOLLOWING ADVANCED FEATURES: • Advanced communications features allowing remote operation and • In-situ measurement of cloud-based PM that provides communication. high accuracy, minimal measurement artifacts • Reduced background determination frequency • Advanced diagnostics. • Unsurpassed performance under high ambient dew point operation • Improved sensitivity compared to other in-line beta attenuation mass monitors. • Advanced communications features allowing remote operation and cloud-based communication • Meteorological and other sensor inputs. • Advanced diagnostics • Improved sensitivity compared to other in-line beta attenuation mass monitors • Meteorological and other sensor inputs. SPECIFICATIONS Measurement Principle: PARAMETER US EPA Designations: Measurement Principle: Beta Attenuation SPECIFICATION EPA Class Beta III Federal Attenuation. Equivalency Method (EQPM-1013-209) US EPA Designations: Measurement Range: - 15 µg/m 3 EPA Class III Federal to 10,000 µg/m 3 Equivalency Method (EQPM-1013-209) Measurement Range: -15 µg/m 3 – 10,000 µg/m 3 Accuracy: Accuracy: Meets US EPA Meets Requirements US-EPA Requirements for Class for III Class PMIII 2.5 PM FEM 2.5 FEM Data Resolution: Data Resolution: 0.1 µg/m 3 0.1 µg/m 3 Lower Detection Limit: < Lower Detection Limit: < 2.4 µg/m 3 2.4 µg/m (Hourly, (Hourly, 2σ) / < 0.5 2σ) / < 0.5 µg/m 3 µg/m (24 Hour, (24 Hour, 2σ) 2σ) Sampling Time: Continuous Air Sampling with Hourly Tape Advance Sampling Time: Measurement Cycles: Continuous Primary: Air Sampling Automatic with Hourly Hourly PM Measurement Tape Advance (Required for PM 2.5 FEM Operation) Measurement Cycles: Sample Flow Rate: Primary: Automatic Secondary: Hourly User Selectable PM Measurement Short Term Averages (Required (1, 5, for 10, PM15, 2.5 FEM or 30 Operation) minute) Secondary: 16.7 User liters/minute Selectable Short Term Averages (1, 5, 10, 15, or 30 minute) Filter Tape: Continuous glass fiber filter, 30mm x 21m roll. Up to 2 months operation per roll. Sample Flow Rate: 16.7 litres / minute Maintenance Interval: 8 Weeks (minimum) Filter Tape: Span Check: Continuous Manual glass Audits fiber filter, Performed 30 mm with x Zero 21 m and roll. Span Up to Foils 2 months (Included) operation per roll Maintenance Interval: Beta Source: 14 8 Weeks (minimum) C (carbon-14), 60 µCi ±15 µCi (< 2.22 X 10 6 Beq), Half-Life 5730 years. Detector Type: Scintillation Photomultiplier Tube. Span Check: Manual Audits Performed with Zero and Span Foils (Included) Operating Temperature Range: -30° to +50° C 14 Beta Source: Operating Humidity Range C (carbon-14), 0 to 90% 60 µCi RH, ± non-condensing 15 µCi (< 2.22 x 10 6 Beq), Half-Life 5730 years Detector Type: Enclosure: Scintillation Instrument Photomultiplier is integrated Tube into its own, weatherproof enclosure and sits on a separable, pump box Analog Output: Two channels; optically isolated; switch settable voltage or current Operating Temperature Range: - 30 to + 50 °C 0-1, 0-2.5, 0-5 VDC / 0-20, 2-20, 4-20 mA Operating Humidity Range: 0 to 90 % RH, (Hourly non-condensing Concentration and/or or User Selectable Short Term Average) Enclosure: Serial Interfaces: Instrument 1 channel; is integrated full duplex into its RS-232, own USB, weatherproof and Ethernet enclosure serial (Shared and common sits on a serial separable output). pump box Baud rates 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Analog Output: Compatible Software: Comet (included), Air Plus, terminal programs such as HyperTerminal Two channels; optically isolated; switch settable voltage or current Data Logger Memory: 108,134 records (12.5 years @ 1 record/hr. 75 days @ 1 record/min). Power Supply: 0 - 1, 0 - 2.5, 100 0 - 5230 VDC VAC; / 050/60 - 20, 2 Hz - 20, universal 4 - 20 AC mApower Power Consumption: (Hourly Concentration 300W (Incl. BAM-1022, and/or or Inlet User Heater, Selectable BX-126 Short BX-127 Term Pump, Average) and Vent Fan) Approvals: Serial Interfaces: NRC, ISO-9001, ROHS, US-EPA 1 channel; full duplex RS232, USB, and Ethernet serial (Shared common serial output) Baud rates 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Compatible Software: Comet (included), Air Plus , terminal programs such as HyperTerminal ® Data Logger Memory: Power Supply: Power Consumption: Approvals: Specifications MAY 2016 108,134 records (12.5 years @ 1 record / hr 75 days @ 1 record / min) 100 - 230 VAC; 50 / 60 Hz universal AC power 1600 Washington Blvd., Grants Pass, OR 97526 300 W (Including BAM 1022, Inlet Heater, BX-126 or Tel: BX-127 541.471.7111 Pump, | and Fax: 541.471.7116 Vent Fan) E-mail: firstname.lastname@example.org | www.metone.com NRC, ISO-9001, ROHS, US EPA FS 603790 OHS 603791 ECOTECH Pty Ltd (Global Head Office) 1492 Ferntree Gully Road Knoxfield VIC 3180 Melbourne Australia +61 3 9730 7800 email@example.com ecotech.com Specifications subject to change without notice. Ecotech, Bam are trademarks or registered trademarks of ECOTECH Pty Ltd in the United States and/or other countries. © 2019 ECOTECH Pty Ltd. All rights reserved. 20190308
Very efficient. Competitive pricing. The reminders, I’m so busy in my job that it’s so great to have a reminder to do something. It really helps me.
I’m very happy.
- Tim Cannon – Research and Development Manager; Pecan Engineering Pty Ltd